site search
online catalog
Edged Weapons
Showing 41 to 60 out of 174
WWII US COLLINS CO. LEGITIMUS NO.18 BOWIE KNIFE AND LEATHER SHEATH
A WII US Collins & Co Legitimus No.18 Bowie Knife with Original Brown Leather Sheath. Clip point blade with two thin grooves near spine. Maker marked "COLLINS & CO./ LEGITIMUS/ MADE IN USA/… (169-634). Learn More »
$450.00
ON HOLD
US PATTERN 1863 8-RIVET BAYONET SCABBARD
The scabbard shown here is of the 1863 pattern which contains eight copper rivets, 4 of which are located on the frog and 4 on the scabbard’s throat. This pattern of 8 copper rivet arrangements,… (490-6980A). Learn More »
$135.00
ON HOLD
THE MILITARY EFFECTS AND MORE OF MAURICE LEYDEN, THIRD NEW YORK CAVALRY
This grouping came directly from the Leyden family in 1998 and within a few months was in the Ray Richey collection. Maurice Leyden was 22 years of age when he enrolled at Syracuse in the military… (1268-777). Learn More »
GEORGIA PIKE BLADE RECOVERED AT MILLEDGEVILLE, GA.
Primitive, but cheap and easily made, pikes were recognized as a stop-gap measure until better arms could be obtained and were made throughout the south by small and large manufacturers with various… (2025-3625). Learn More »
AMES MODEL 1841 U.S. NAVAL CUTLASS DATED 1842: FIRST YEAR OF PRODUCTION; FIRST CONTRACT
The 1841 U.S. Navy cutlass is scarce. Only 6,600 of them were made from 1842 through 1846. Ames sent three cutlasses of slightly different configuration to the Board of Naval Ordnance in November… (172-6124). Learn More »
US PATTERN 1863 8-RIVET BAYONET SCABBARD BY CROSSMAN OF NEWARK
The scabbard shown here is of the 1863 pattern which contains eight copper rivets, 4 of which are located on the frog and 4 on the scabbard’s throat. This pattern of 8 copper rivet arrangements,… (172-6061). Learn More »
$250.00
ON HOLD
BRITISH PATTERN 1859 CUTLASS BAYONET
This is the Type 2, for use on the Pattern 1858 Naval Rifle. The British military wanted to create a dual-purpose bayonet for the rifle and settled on a combination naval cutlass & bayonet. The… (1309-75). Learn More »
$1,395.00
ON HOLD
A PATTERN 1856/60 ENFIELD YATAGHAN BAYONET FOR THE NAVY
It seems that not all the bayonets ordered by the British Board of Ordnance were of the Cutlass 1859 Pattern. Some, like the one we are offering, were made specifically or modified to fit on the… (1284-27). Learn More »
$285.00
ON HOLD
REGULATION M1850 U.S. FOOT OFFICER’S SWORD BY AMES IN VERY GOOD CONDITION
This is a very good example of the Civil War regulation sword for line officers serving on foot, that is: Captains and Lieutenants of infantry, etc. This pattern was made regulation in 1850, is the… (1311-15). Learn More »
M1861 NAVY PATTERN ARMY CUTLASS
This is a rare Army cutlass. Ames received a contract from the Army on 18 January 1864 for 300 Navy 1861-pattern cutlasses. They were delivered on 10 February1864 and issued Col. William A.… (1306-10). Learn More »
COMPLETE US PATTERN 1863 8-RIVET BAYONET SCABBARD WITH PARTIAL STAMPS
The scabbard shown here is of the 1863 pattern fixed by eight copper rivets, 4 of which are located on the frog and 4 on the scabbard’s throat. This pattern of 8 copper rivets, which superseded the… (172-6060). Learn More »
M1852 PRUSSIAN NAVY CUTLASS BY GRAH OF SOLINGEN
This is a very impressive naval cutlass and is much heavier that the American cutlass made by Ames. This piece measures approximately 29” long overall with a 23.25” bolo-shaped blade. The blade… (160-590). Learn More »
MODEL 1818 BAVARIAN OFFICER'S SWORD
Bearing on the blade the monogram of Maximillion Frederick the First of Bavaria (Maximilian I Joseph, King of Bavaria | Unofficial Royalty). A rarely seen sword it is not unsimilar in design and… (490-4161). Learn More »
IMPORTED (CLAUBERG) US MODEL 1860 LIGHT CAVALRY OFFICER'S SABER
This saber was manufactured by the most highly respected Solingen, Prussia, and imported to the U.S. for use in the Civil War. The curved 35-½ inch blade is a gray dusky peppery patina with only two… (539-03). Learn More »
$1,350.00
Originally $1,800.00
CONFEDERATE USED US MODEL 1832 ARTILLERY SHORT SWORD BY AMES, DATED 1856
This is a nice example of the US regulation Model 1832 short sword with its scabbard that shows not only some of the changes in the marking of these swords over time, but also a very Confederate… (2022-2377). Learn More »
$2,350.00
Originally $2,950.00
AMERICAN FEDERAL PERIOD INFANTRY SWORD, OR POSSIBLY NAVAL CUTLASS, 1795-1810
This iron hilted sword shows the “Republican simplicity” of many U.S. swords dating to the early Republic, about 1795-1810. It is unmarked and the grip is a simple cylinder of dark wood with just… (2022-798). Learn More »
$1,100.00
Originally $1,395.00
MODEL 1860 CAVALRY SABER – 1863 DATED
This mid-war production weapon is a M-1860 Light Cavalry saber. Considered a lighter, more maneuverable weapon than its predecessor the M-1840 “Wristbreaker,” the light cavalry saber weighed about… (2025-2703). Learn More »
WORLD WAR TWO / KOREA UNITED STATES MARINE CORPS OFFICER’S MAMALUKE SWORD
The drawn sword meas. approx. 36.00 inches long. The blade itself meas. approx. 31.00 inches long x 0.75 of an inch wide at the ricasso. It has a central fuller that starts just above the ricasso and… (2021-944). Learn More »
$750.00
Originally $1,250.00
RARE PATTERN 1896 MOUNTAIN ARTILLERY SWORD
Looking for all the world like a Napoleonic era sword this weapon is rather the British Military 1896 Pattern Mountain Artillery Sword. It was used by soldiers manning guns in mountainous areas,… (2025-2710). Learn More »
$650.00
ON HOLD
CONFEDERATE CLOVERLEAF PIKE
A very good, unmarked example of the striking Confederate “cloverleaf” pike formerly in the collections of the Texas Civil War Museum. The nickname obviously derives from the trefoil spearhead… (1179-1659). Learn More »
Showing 41 to 60 out of 174
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
featured item
VERY FINE, VERY RARE .36 CALIBER, 6-CAVITY GANG MOLD FOR COLT M1851 NAVY REVOLVER
Measuring 13” long, this iron bullet mold casts six .36 caliber elongated pistol bullets. Turned wood handles and brass ferrules are fitted over the arms of the mold halves. The sprue cutter is attached to the top at the hinge pin and swings from… (1304-117). Learn More »
site search
Upcoming Events
May 13 - 17: N-SSA Spring Nationals, Fort Shenandoah, Winchester, VA Learn More »
