Bayonets

Showing 21 to 40 out of 50


RARE JOSLYN MODEL 1855 RIFLE SABER BAYONET

RARE JOSLYN MODEL 1855 RIFLE SABER BAYONET

The M1855 Joslyn Rifle is a scarce longarm and its saber bayonet equally so. With the rifles manufactured by A.H. Waters and the unmarked bayonets likely acquired from Ames, Flayderman estimated… (490-7546). Learn More »

BRITISH IMPORTED, CONFEDERATE USED BAYONET

BRITISH IMPORTED, CONFEDERATE USED BAYONET

Item meas. approx. 28.75 inches overall. The blade meas. approx. 23.75 inches long and is approx. 1.08 inches wide at the ricasso. Blade surface is bright with some scattered mottling. Heavier near… (344-158). Learn More »

$950.00
Originally $1,295.00

REMINGTON ZOUAVE SABRE BAYONET

REMINGTON ZOUAVE SABRE BAYONET

Cast brass ribbed handle with bar and button type attachment mechanism. This mechanism is frozen and needs to be loosened and oiled. Surface of the handle shows moderate wear. Counterguard has barrel… (1252-07). Learn More »

U.S. MODEL 1835/1842 SOCKET BAYONET

U.S. MODEL 1835/1842 SOCKET BAYONET

This Federal accoutrement is an original angular socket bayonet made for the Model 1835/42 smoothbore musket. The term angular bayonet refers to the type most commonly used by infantry soldiers. The… (1304-111). Learn More »

$225.00
ON HOLD

SWORD BAYONET FOR THE COLT ALTERATION OF THE MODEL 1841 MISSISSIPPI RIFLE

SWORD BAYONET FOR THE COLT ALTERATION OF THE MODEL 1841 MISSISSIPPI RIFLE

In 1861 Colt reached an agreement with the government to purchase Model 1841 rifles at $10.00 each, alter them to .58 caliber, fit them with sword bayonets, and then sell them back to the government… (490-7259). Learn More »

U.S. MODEL 1855 RIFLE SWORD BAYONET 1857 TO MID-1860

U.S. MODEL 1855 RIFLE SWORD BAYONET 1857 TO MID-1860

This brass hilt sword bayonet is a product of the Harpers Ferry Armory, made for the Model 1855 Rifle. Like the majority of these bayonets, this one has an unmarked blade. (Less than half of known… (490-7257). Learn More »

RARE “SNELL” SWORD BAYONET – M1841 RIFLE, CIRCA 1855

RARE “SNELL” SWORD BAYONET – M1841 RIFLE, CIRCA 1855

Scarce “Snell” or “ring-style” sword bayonet for the Mississippi Rifle. When it became evident that riflemen needed a bayonet to put them on equal footing with regular musket-armed infantry in… (490-7260). Learn More »

REGIMENTALLY MARKED PATTERN 1848 BRUNSWICK BAYONET

REGIMENTALLY MARKED PATTERN 1848 BRUNSWICK BAYONET

British Brunswick rifle bayonet stamped "RCR" Royal Canadian Rifle Regiment. "In response to a significant and growing problem of desertions of enlisted men during the 1830's, the British established… (2025-413). Learn More »

VERY FINE HALL RIFLE BAYONET

VERY FINE HALL RIFLE BAYONET

This is an example of the rare socket bayonet for the Hall rifle. Robert Reilly in “American Socket Bayonets and Scabbards” suggests this may be for the Model 1841 rifle. The bayonet has an… (2025-868). Learn More »

M1859 SHARPS SABER BAYONET

M1859 SHARPS SABER BAYONET

This is an original American Civil War saber bayonet manufactured by the Ames Manufacturing Company of Chicopee, Massachusetts just prior to the Civil War.  Made to fit the infantry length Sharps… (2024-1011). Learn More »

ALABAMA USED SWORD BAYONET

ALABAMA USED SWORD BAYONET

This is a rarely seen German made sword bayonet for the 1841 Mississippi rifle, and many were marketed by Horstmann & Sons of Philadelphia. These were typically marked by that firm on the ricasso… (1000-937). Learn More »

M1859 SHARPS SABER BAYONET

M1859 SHARPS SABER BAYONET

Saber-style bayonet for the Sharps Rifle. The overall length of this bayonet is 26 ½” while the graceful-looking, slightly curved blade itself is 21 ½” long. Bayonet was primarily intended for… (1037-406). Learn More »

$625.00
Originally $775.00

HARPERS FERRY U.S. MODEL 1855 RIFLE SWORD BAYONET, 1857 TO MID-1860, WITH SCARCE PITTMAN MARKED SCABBARD

HARPERS FERRY U.S. MODEL 1855 RIFLE SWORD BAYONET, 1857 TO MID-1860, WITH SCARCE PITTMAN MARKED SCABBARD

This brass hilt sword bayonet for the M1855 rifle is in very good condition and complete with scabbard. Like the rifles, these were made at Harpers Ferry and that being the only place manufacture,… (490-7052). Learn More »

PLYMOUTH NAVY RIFLE BAYONET WITH SCABBARD

PLYMOUTH NAVY RIFLE BAYONET WITH SCABBARD

This Plymouth “Navy” Rifle bayonet has a partially bright blade with a light patina and minor localized pitting typical for the age and intended environments of use for such a piece.  The… (490-7070). Learn More »

PLYMOUTH NAVY RIFLE BAYONET WITH SCABBARD

PLYMOUTH NAVY RIFLE BAYONET WITH SCABBARD

This Plymouth “Navy” Rifle bayonet has a partially bright blade with a light patina and minor localized pitting typical for the age and intended environments of use for such a piece.  The… (2024-1696). Learn More »

MODEL 1851 CADET RIFLE SOCKET BAYONET

MODEL 1851 CADET RIFLE SOCKET BAYONET

VF condition with nice, smooth metal with even gray patina.  Blade measures 14.5”, socket 2 5/8”. Blade with nice “US” stamping. Scarce bayonet. … (490-7078). Learn More »

HARPERS FERRY M1819 SOCKET BAYONET FOR HALL RIFLE

HARPERS FERRY M1819 SOCKET BAYONET FOR HALL RIFLE

This is a U.S. Model 1819 Socket Bayonet for the Hall Rifle as manufactured at Harpers Ferry. The US M1816/22/27 series of bayonets feature a 16” blade, face flute of varying lengths, a T-shaped… (490-6893). Learn More »

RARE SOCKET BAYONET FOR THE “DRAKE-ALTERATION” THE M1841 MISSISSIPPI RIFLE

RARE SOCKET BAYONET FOR THE “DRAKE-ALTERATION” THE M1841 MISSISSIPPI RIFLE

The State of Massachusetts contracted with the firm of A.J. Drake of Boston to alter 1,742 Model 1841 Mississippi Rifles that were in state stores. The guns were unaltered in caliber (retaining… (490-6787). Learn More »

SHARPS & HANKINS SABER BAYONET - NO SCABBARD

SHARPS & HANKINS SABER BAYONET - NO SCABBARD

Overall, the bayonet meas. approx. 25.25 inches long from point to pommel. The blade itself is 19.50 inches long with a semi-bright surface with light scattered mottling and minor pitting in the point… (169-602). Learn More »

AUSTRIAN MODEL 1867 WERNDL BAYONET WITH SCABBARD

AUSTRIAN MODEL 1867 WERNDL BAYONET WITH SCABBARD

The drawn bayonet meas. approx. 28.25 inches long from point to pommel. The bright blade meas. 23.00 inches with a 15.00 inch unstopped central fuller. One side of the ricasso bears the Austrian crest… (490-4163). Learn More »


Showing 21 to 40 out of 50